Description

The SM7B dynamic microphone has a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications. It features excellent shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices. The SM7B has been updated from earlier models with an improved bracket design that offers greater stability. In addition to its standard windscreen, it also includes the A7WS windscreen for close-talk applications. The MST100-30B from Vu is a standard height microphone stand with a telescopic boom and tripod base. The tripod base adds stability and folds down for easy storage and transport. The height of the stand is adjustable from 37.75" to 65.625" while the length of the boom arm is adjustable from 21.375" to 33.625". The boom arm terminates in the industry-standard 5/8" thread. This microphone stand/boom combination stand is ideal for churches, schools, clubs, conference rooms, music venues or anywhere PA systems are being used. The Cloudlifter CL-1 Provides up to +25dB of ultra-clean gain in two distinct stages with optimal impedance loading for dynamic and ribbon mics to perform their best. The CL-1 will allow you to bring out the natural sonic characteristics of any microphone. Simply connect your dynamic or ribbon mic to the input and connect a mixer or preamp to the output, the Cloudlifter does the rest. Plus, the Cloudlifter works equally well on stage or in the studio. Part of Cable Up's rugged Industrial line, the Mic-XX-20 features high-performance, balanced analog microphone cable. The soldered Rean by Neutrik XLR connectors are fitted with gold-plated contacts for reliable professional use at a competitive price All Cable Up® Industrial cables are covered by a 1-year unconditional warranty against defects in material or workmanship. Includes SM7B Dynamic Vocal Microphone Cloudlifter CL1 Microphone Preamp MST100-30B Microphone Stand MIC-XX-20 20 ft. XLR Cable Features SM7B Dynamic Vocal Microphone Flat, wide-range frequency response for exceptionally clean and natural music and speech Bass roll off and midrange emphasis controls with graphic display of response setting Improved rejection of electromagnetic hum, optimized for computer monitors Internal air-suspension shock isolation virtually eliminates mechanical noise transmission Highly effective pop filter, even for close-up vocals or narration Cloudlifter CL1 Microphone Preamp 2 distinct stages of ultra-clean gain Easy to use, requires only Phantom Power Compatible with tube, battery, or power supply driven microphones Safe for all passive ribbons with no transfer of phantom power Handcrafted entirely in the USA using environmentally friendly methods MST100-30B Microphone Stand Constructed With Steel Tubing Folding Tripod Base With Rubber Feet Telescoping Boom Arm (21.375" - 33.625" adjustable) 37.75" to 65.625" Height Adjustment Metal Clutch Stand Terminates With Industry Standard 5/8" Thread Black Finish MIC-XX-20 XLR Cable 20' in length High-performance, balanced analog mic cable Soldered XLR connectors 1-year unconditional warranty Melt lacquer shell Specifications SM7B Dynamic Vocal Microphone Type: Dynamic (moving coil) Frequency Response: 50 to 20,000 Hz Polar Pattern: Cardioid Output Impedance: 150 Ω Sensitivity (@ 1 kHz, open circuit voltage): -59 dBV/Pa[1] (1.12 mV) Hum Pickup (typical, at 60 Hz, equivalent SPL/mOe): 11 dB Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Net Weight: 0.764 kg (1.69 lbs) Housing: Dark gray enamel aluminum and steel case with dark gray foam windscreen Cloudlifter CL1 Microphone Preamp Type: Mic Level Booster Channels: 1 Input: XLR Output: XLR Dimensions (H x W x D): 2 x 2 x 4.5 in. (5.08 x 5.08 x 11.43 cm) Weight: 0.85 lbs. MIC-XX-20 XLR Cable No. of Conductors: 2 Conductor Gauge: 24 AWG Stranding: 26x36 Shield Type & % Coverage: B.C. Braid, 78%, overall spiral shield Overall Diameter: 0.245" Nominal Capacitance, Conductor to Conductor: 19 pf / ft Nominal Capacitance, One conductor to shield with other conductor tied to shield: 35 pf / ft Jacket Thickness: 0.045" Insulation Thickness: 0.018" Weight per 100 ft: 3.2 lbs Connectors: Part #, Male: X-002 Part #, Female: X-001 Soldered connectors with gold-plated contacts Melt lacquer shell